To address this, Morocco is resolutely focusing on lithium iron phosphate (LFP) batteries, a reliable, durable technology suited to local constraints. This choice is part of a national strategy for equipping, testing, and industrializing energy storage.
[pdf] The recommended method for charging a LiFePO4 battery pack is the CCCV (Constant Current, Constant Voltage) approach: Constant Current: Charge the battery at a rate of 0.3C. Constant Voltage: Once the battery reaches 3.65V per cell, switch to constant voltage charging.
[pdf] 
In LiFePO4 batteries, as soon as the cell with the lowest voltage hits the discharge voltage cut off designated by the BMS or PCM, it will shut down the entire battery. If the cells were unbalanced during discharge, this may mean that some cells have unused energy and that the battery isn’t truly “empty”. Likewise,. .
The term balancing comes from the matching of the cells by capacity and voltage, and controlling their voltages through cycling the battery to maintain the balance, or close to equal voltages at all State of Charge (SOC) levels. It is important to note that. .
LiFePO4 battery packs ( or any lithium battery packs) have a circuit board with either a balance circuit, protective circuit module (PCM), or battery management circuit (BMS) board that monitor the battery and its cells (read this blog for more information. .
Passive cell balancing is where the current entering the battery is bled off through resistors. In this scenario, the current enters the battery and fills the cells. If one cell is “full”, the resistors take that energy and burns it off (turning it to heat) so that way the current.
[pdf] 
